SKU: 89395456192
bari sax altissimo g

bari sax altissimo g The BetterSax Baritone Saxophone – SAX

Sale price$18.60 Regular price$20.67
Save 10%

Pay in installments of $5.17 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 15 - Aug 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

bari sax altissimo g The BetterSax Baritone Saxophone – SAXA fantastic baritone affordable, stylish and with a full bodied tone that you will love! The BetterSax Classic Baritone follows the same mantra as the alto and tenor models, offering quality in all departments while being affordable at the same time. Many student baritones can have a slightly lacklustre tone and inconsistency through the range, but the BetterSax Classic has none of that. The Japanese style bore design helps to bring about a tone that

A fantastic baritone - affordable, stylish and with a full-bodied tone that you will love!

The BetterSax Classic Baritone follows the same mantra as the alto and tenor models, offering quality in all departments while being affordable at the same time.  Many student baritones can have a slightly lacklustre tone and inconsistency through the range, but the BetterSax Classic has none of that.  The Japanese-style bore design helps to bring about a tone that is rich, sophisticated and even through the range.  Intonation is stable and consistent from the low A to the top F#.  The keywork has been designed with great ergonomics in mind; the low A key is slender and easy to manipulate, the table key cluster is small and set close to the Left-hand main stack, the low Eb/C is similarly accessible in relation to the Right-hand stack.  The overall key action is light, and close to the body, allowing the player to freely manoeuvre around the instrument with ease.

For a high-end student instrument, the BetterSax Classic does very well in the looks department.  The lacquer has a deep lustre and depth that is immediately appealing.  Regarding build quality and componentry, again there is attention to detail.  Pisoni Leather pads with metal domed resonators offer a good seal between pad and tone-hole, corks and felts are premium-grade, blue steel springs ensure an even key action, and the overall mechanism is sturdy and fluid in operation.

Another great aspect to this baritone is the inclusion of the BetterSax Classic mouthpiece - a full-bodied and responsive beginner's mouthpiece that out-performs most 'stock' mouthpieces that come with many instruments.  These are made in the Babbit factory in the USA, famous for the production of the classic American Links and Meyers.  The pairing of this mouthpiece with this sax gives the player a free-blowing, rich and vintagy tone - a great way to start out if you're new to the baritone!

Besides the mouthpiece, the sax comes with an accessories package that includes a ligature, cap, neck strap, cork grease and polishing cloth.

FEATURES

• Material: Brass

• Finish: Cognac-tinted lacquer

• Key Touches: Simulated Mother of Pearl

• Neck: Better Sax design!

• Engraving: Classic-style, vintage theme

• Case: Stylish rsoft-shell rectangular case with wheels - ample accessories/sheet music storage - with back-pack straps

• Mouthpiece: BetterSax Classic

• Made in: China. 

• Free Professional Set Up & Free Check over within a Year

• Recommended for: Students, Intermediate players, or pros looking for a backup horn.

Review

As I write this, I'm hot off the heels of doing a video review for the Classic baritone and have a strong overall enthusiasm for this entry into the market. Given its price point - not too cheap, but certainly not in the realm of the pro horns, I believe it offers a lot.  I believe a great many players look to take up the bari because they are curious about the experience of playing such an instrument, or they are looking to play it in some kind of band, perhaps in conjunction with alto or tenor.  For this, it's not always necessary to break the bank and go for those high-end instruments.  It's true that on a Yani or Yamaha you will notice an extra notch of power and projection and refinement in mechanism, but again the law of diminishing returns applies - you can spend half (or less) the money and get a baritone that has an extremely mature, and in my view, vintage-sounding tone.  The BetterSax Classic is also highly playable - the mechanism is solid and the keywork is comfortable with a great action.

Given the success of the alto and tenors, and the trust the sax community holds in Jay Metcalf and the BetterSax products, I can see this baritone being an extremely popular addition to the range.

Jim Cheek

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 89395456192

Discover Niche Categories That Outsell bari sax altissimo g

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ReluctantConsumer
Natrona Heights, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Bozeman, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
J
Verified Purchase
Joshua McPheron
Lowell, US
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
C
Verified Purchase
Courtney
Port Orchard, US
★★★★★ 5
Would buy again!!!
Color: Dark Grey, Size: 7 Seat
⭐️⭐️⭐️⭐️⭐️ Perfect Couch for Comfort, Space, and Style! I couldn’t be happier with my purchase of the SUAWY 108 Inch Sectional Sleeper. From the moment it arrived, I knew I made the right choice. Setup was straightforward, and the couch feels incredibly sturdy and well-built. The fabric is soft to the touch yet durable enough to handle everyday use, which is perfect for both lounging and having guests over. The size is exactly what I was looking for — spacious enough to seat a large group comfortably without feeling cramped. Whether I’m relaxing after work, having friends over, or stretching out for a nap, it provides more than enough room. The chaise and sleeper function are real game changers. The pull-out sleeper is surprisingly supportive and comfortable — not at all like the thin, saggy mattresses I’ve experienced with other sofa beds. My guests have all commented on how well they slept! I also love the storage space built into the sectional. It’s so convenient for keeping extra blankets, pillows, or even board games tucked away neatly. This design makes it feel like the couch was made with real-life use in mind, not just looks. Speaking of looks, the style is modern and clean, and it blends perfectly into my living room. The neutral tone makes it easy to decorate around, and it honestly makes the whole room look more put-together. Overall, this sectional sleeper has completely exceeded my expectations. It’s comfortable, practical, stylish, and worth every penny. If you’re on the fence, don’t hesitate — this is absolutely one of the best furniture investments I’ve made. I’m genuinely so happy every time I sit down on it, and I highly recommend it to anyone looking for a large, versatile sectional.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2025
P
Verified Purchase
patrick
Charlottesville, US
★★★★★ 4
An okay sectional
Color: Dark Grey, Size: 5 Seat, Color: Dark Grey, Size: 5 Seat
I want to give my honest review of this couch. One significant difference in the actual couch vs the photos here is the back of the couch is actually much thinner than in the photos. It’s made with metal framing that is very thin covered in fabric with no sort of padding. Also, the back of the couch does not angle back far. Which makes the couch pretty uncomfortable, as your back is up at almost a 90 degree angle. The quality of the couch overall is good. It was easy to assemble and I didn’t really run into any issues in that regard. Like others have said. The cushions are quite thin and also not super soft. The couch is also quite low to the ground, so if you’re looking for that oversized super soft couch, this probably isn’t the one. I do love the pull out bed/chaise which is super nice, ans the storage is great too. For the cost of the couch I think the quality and comfort are good. I don’t love it, I don’t hate it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026

recommand products