SKU: 93465736340
zobo jogging stroller weather shield

zobo jogging stroller weather shield Elegance Alpha Stroller Weather Shield (Chocolate) – Manito USA

$22.20 $24.67
Save 10%
No.2 Bestseller on realestatemontenegro.me >

Pay in installments of $6.17 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 10 - Aug 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

zobo jogging stroller weather shield Elegance Alpha Stroller Weather Shield (Chocolate) – Manito USAElegance Alpha POINT Finest fabric and materials Foot Cover Foot cover prevents the cold air to pass through the bottom front of the stroller. Foot cover is constructed so that it completely wraps around the baby's feet and elastic S Hooks seal the gaps to provide warming environment. Detachable foot wrapper for easy cleaning Detachable Foot Cover Detachable foot cover can easily be removed from the main body of the cover for convenience when

Elegance Alpha POINT

Finest fabric and materials

Foot-Cover

Foot-cover prevents the cold air to pass through the bottom front of the stroller. Foot-cover is constructed so that it completely wraps around the baby's feet and elastic S-Hooks seal the gaps to provide warming environment.

Detachable foot wrapper for easy cleaning

Detachable Foot-Cover

 

Detachable foot-cover can easily be removed from the main body of the cover for convenience when cleaning.

Open the zipper to completely separate the foot-cover from the weather shield to wash and clean. (It's highly recommended to use a wet towel to clean) Since it's coated fabric, it's recommended to hand wash with lukewarm water and small amounts of detergent and air dry in a shaded area. Do not use bleach or any other chemical agents as decolaration may occur.

Perfect protection of baby's eyesight

Vision Protective Windows

Unlike vinyl based stroller covers which cause refraction / distortion due to it's wrinkly characteristics, Manito is the first and the only one in the industry to adopt clear flat refraction free eye-protective windows so that your baby can see through with clear vision while inside the stroller. Vision development is very important during the early stages of development.

Vinyl based cover

Optial distortion or refraction may cause dizziness and stress in the eyes.

Manito cover

Refractin free flat surface clear windows aid your baby's vision

Sun Screen Curtain

When the weather is cold and sun is out or when baby is asleep easy pull-up and pull-down Sun Screen Curtain provides extra sun protection and comfort for the baby inside the stroller.

Large easy in-and-out entry

Front window with two-way zipper provides easy in-and-out of yiour baby without the hassle of removing the cover. Also, easy to attend the baby anytime anywhere.

Fasten 3 pairs of S-Hooks

Windblow Prevention

Cover is equipped with elastic S-Hooks to secure the cover onto the stroller. It prevents the cover being blown off the strong wind.

Rear Pockets

Convenience Pocket

Two adjacent convenience pockets in the rear is suitable for carrying baby essentials.

Storage Pouch

Conveniently fold the cover and use the included portable pouch for easy storage and carry when not in use.

Designed for Ease

Convenient Handling

Elegance Alpha Stroller Weather Shield can be used in front-facing and rear-facing seating positions. It can even be used when the seat's backrest is fully reclined.

Fully adjustable to fit on to most standard upright strollers from major brands with a canopy measuring between 15 - 19 inch. Also, can be used on reversible (rear or forward facing) strollers. Refer to "How to Select" illustration for your stroller's compatibility.

Covering the Stroller

Spread open the cover completely and partially open the zipper where the foot-cover is attached.

Find the handle-insert opening and insert the stroller's handle through the opening.

Fit and organize the back of the cover by pulling it towards the bottom.

Pull out the convenience pocket hidden inside the top of the weather shield to cover the handle-insert opening.

Fit and organize the front of the cover by pulling it towards the bottom of the front side.

Close the zipper of the foot-cover.

Remove the Protective Films

Make sure to peel off the blue protective films on the windows before using the product. By doing so it will provide clear vision through the windows and protect baby's eye-vision when inside the stroller. There are two films on each window. (One in front and one in the back, total of six films must be removed before using).

Safety Warning!
Do not use this product other than stroller weather shield / rain cover purposes. It is intended to be used to protect against cold, wind, rain and snow. This product is NOT intended to be used in the hot summer days except in the rain.

To avoid danger of suffocation and excessive temperature, never leave the child unattended with the cover fitted on the stroller.

Note: Make sure to remove the protective films from every windows (inside and outside) before using the product to acquire clear vision and effective UV screening from the sunlight.

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 93465736340

Discover Niche Categories That Outsell zobo jogging stroller weather shield

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 27 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Terry Justice
Belleville, US
★★★★★ 5
Better than the green goo
Size: Full-size Truck, SUV (2-pack)
Recently, while I was at work, I noticed that I had at some point run over a nail with my car. Normally, you'd take your car to the tire shop and let them plug the hole for you. Well, the only problem was that the nail decided that it was going to poke my tire where the sidewall meets the tread, and most shops will refuse to plug a tire when it's punctured there. Makes sense, it's a liability issue for them, so I can't blame them. That still leaves me with the problem of having a tire with a nail in it. So, I could either replace the tire with either a new or used tire, which is expensive or I can try using a sealant to try and get as many miles out of my tire as I can. In the past, I had tried using the green goo sealant on nail holes, and while it works to get you 15 miles down the road, that's about it. Now, while TireJect doesn't recommend using their product on punctures on the shoulder of the tire, I decided that I'd give it a try to see if it would work. And as of writing this review, it's been about 10 days since I put TireJect in my tire, and so far, it hasn't leaked any air, despite it not being meant for the shoulder. When money isn't so tight, I'll probably go ahead and replace the tire, especially since there's only about 4/32 tread depth left, but for the time being, I'll keep running it, and hopefully it keeps holding pressure properly like it has been. Now, as for how easy it is to use, the only tools you will need that aren't provided, is an air compressor to allow you to re-inflate the tire. The kit comes with everything else you will need, including a valve core removal tool and a syringe to add the sealant to your tire. To use this product, you will first need to carefully remove the valve core with the provided tool, careful not to lose the core, since it doesn't come with a replacement core. After that, thread the hose on the syringe on to your valve stem, and then carefully add the required amount of sealant to the syringe. If you accidentally spill some, wipe it off before it dries, so that it doesn't stain anything. From there, just push the goo into the tire with the plunger, adding more to the syringe as necessary. When you're all done, re-install the valve core into the valve stem snuggly, careful not to over-tighten, and air up the tire to the recommended PSI with your compressor. After all that is done, go take a short, slow drive to distribute the sealant, and then recheck your air pressure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 29, 2025
T
Verified Purchase
Tony Nowikowski
Los Angeles, US
★★★★★ 1
TPMS Compatability is a LIE
Size: Sedan, Crossover, Small Truck
2018 Subaru Impreza, with one tire with a slow leak (about 2 PSI a week) that I couldn't trace. I bought the "Full-Size Sedan, Small Truck, Crossover" kit (the 6 oz. pouch) based on my tire size, 225/40/18. After I removed the valve core, attached the dispensing hose and opened the cap, the product would not flow into the tire. I squeezed the pouch, but that only made the product leak out around the valve stem onto the wheel and driveway. I tried rotating the tire so the valve stem was at the top, and and also at the bottom. I even took the wheel off so I could get a fully vertical flow. Nothing worked. I finally gave up after only about half the product was dispensed, and I do think most of it went somewhere other than in the tire. I reinstalled the valve core, remounted the wheel, plugged in my little lighter socket-powered compresseor, and tried to inflate the tire. And ... NOTHING. The pressure reading on the compressor immediately shot up to over 100 PSI, and it automatically shut off. Tried multiple times, with the same result. I again removed the valve core, and a) no air came out of the tire when I removed it, and b) even with no valve core the compressor still would not pump air into the tire. Clearly the gunk had completely blocked the valve/TPMS. Fortunately, when I took the tire to Costco (where I'd bought it), they were able to fix the damage I'd done, as well as patching a small nail hole in the tread I hadn't seen (that was clearly the source of the slow leak) for no charge. Since I've already submitted a refund request, ultimately all it really cost me was my time and effort ... and a whole lot of stress.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2024
R
Verified Purchase
raspree56
Houston, US
★★★★★ 5
Forget the gooey stuff, this product WORKS! See UPDATES 1 and 2
Size: Compact Car, Mid-size Sedan
I've had a slow leak in one of my tires for some time. It's a common thing with chrome plated alloy wheels, they get corrosion on the bead area where the tire seals and then you get a slow leak. This was the only product which is water soluble so it's not going to make a permanent mess inside the tire; additionally, it contains tiny bits of Tufsyn which is the material some tires are made from. So it's not just a liquid that is sealing the leak, it's tiny bits of rubber. I was putting 5 or 6 lbs of air in my tire every few days, and I could see that the tire was getting low. I installed this TireJect per the instructions a week ago and the tire appears to be doing great, despite the fact that we've had some very cold weather. (I didn't want to check it with a gauge while it was this cold out because just in case the tire's valve didn't seal all the way; I'll check with a gauge when this cold snap is past.) While I can't say for 100% sure that there is no more leak, I suspect that the leak has been sealed up completely. This is a product unlike the others and I think it's worth the price. FIRST UPDATE: It has been two months and I haven't had to add any air at all to the tire where I used this product. There was a slow rim leak which was losing about a pound or so per day and it has been totally fixed. The car has sat for several days a few times, including in single digit cold weather, as well as driven regularly otherwise, and the tire hasn't lost any air. I think it's the micro Tufsyn fibers in this product which seal leaks better than some goopy glue stuff other brands are made of. I totally recommend this product! SECOND UPDATE - it's been eleven months since I added this to my tire with the slow rim leak and I have not had to add air a single time. Not once. THIS STUFF WORKS. Forget the slime and foam and get this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2024
J
Verified Purchase
Jack
Lake Worth, US
★★★★★ 5
Good
Prefect. It’s exactly what my lawnmower needed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
G
Verified Purchase
George Gagnon
Pawtucket, US
★★★★★ 5
Snowblower repair.
Snowblower spark plugs that work for me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026

recommand products

UPPAbaby Vista/Cruz Car Seat Adapters for Maxi-Cosi, Nuna, Cybex
23.23
Cybex Gazelle S Car Seat Adapter
25.31
PEG Car Seat Adapter for YPSI, Veloce & Vivace – Strolleria
26.43
Indie Twin Maxi Cosi/Cybex/Nuna Car Seat Adapters – Jen's Organic Baby
27.61
Cybex Priam 4 Replacement Car Seat Adapter
28.58